The Grit Guard® Insert

Most paint swirls are caused by improper washing technique. For example, when you wash your vehicle, dirt and sand get trapped in the sponge or wash mitt. The first time you re-wet your sponge in the bucket, some of the abrasive particles will come off the sponge into the water. Subsequent dips in the bucket will re-contaminate your sponge. These contaminants will then rub against your paint and produce swirls.  The Grit Guard allows you to rub the wash media against the grit grate and then trap those particles at the bottom of the wash bucket.

* Place the Grit Guard® Insert in the bottom of any 12" diameter Bucket/Pail.
* Simply rub your mitt or brush across the Grit Guard® Insert while washing your vehicle, boat, motorcycle, RV…
* Radial Surface Design extracts particles and contaminants from mitts and brushes.
* Gravity causes dirt to settle to the bottom of the container.
* Wash water stays clean - Scratch-Free Clean.
* Four Quadrants on the base of the Grit Guard® Insert calm the wash water.
* Designed to save every car enthusiast time and money.
* NO MORE long hours spent removing scratches caused by improper car washing.
* Wash it Right with Grit Guard®! Peace of Mind Guaranteed.
* The Grit Guard® Insert works great for: Small Parts Cleaning, Wet Sanding, Oil Filter Draining.

Two Grit Guards are better than one! For optimum paint protection, stack two Grit Guards in one bucket. The stacked grids stand 5” above the bottom of the bucket and stabilize more water. The grit settles to the bottom of the bucket and remains there because the grids prevent the water from being stirred up in the bottom. The addition of a second Grit Guard also provides more clearance between the clean water at the top and the dirty water at the bottom to lessen the likelihood that a stray grain of sand will find its way to the top.