Menzerna Super Finish 4500 (SF4500) is the renaming of PO85RD.  It's the exact same formula as PO85RD, only the bottle and name have been changed.

Menzerna Super Finish SF4500 is the first polish developed by Menzerna for the scratch-resistant, ceramic clear coats. The fine grade finishing polish removes 2500 grit sanding marks from the paint and eliminates compounding haze to leave the paint looking smooth and shiny.

Menzerna Super Finish SF4500 is one of Menzerna’s Professional Line car polishes formulated specifically for assembly line use. Mercedes Benz of Germany uses Menzerna polishes on their brand new vehicles to remove overspray and refine the newly cured paint finishes. Now body shops and enthusiasts can use Menzerna Super Finish SF4500 to achieve a new car gloss!

Menzerna Super Finish SF4500 is made with a very finely ground abrasive powder that leaves no marring or surface haze. Though designed for fresh OEM coatings, Menzerna Super Finish SF4500 can be used as a gloss-enhancing polish or finishing polish on older paint finishes. It will eliminate compounding marks and prepare the paint for wax or sealant.

Menzerna Super Finish SF4500 is body and paint shop safe. It contains no waxes, glazes, or silicones.

Apply Menzerna Super Finish SF4500 with a dual action or rotary (circular) polisher for the best cutting power. For gloss enhancement, Menzerna Super Finish SF4500 can be applied by hand.

Application by Machine:

1. Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Menzerna Polish SF4500 out of direct sunlight.

2. Use a soft foam finishing pad, like Lake Country’s CCS Black Finishing Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.

3. Polish at 1200-1800 RPM (5000-6000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.

4. Wipe the area with a damp microfiber cloth.

5. Always apply a wax or sealant after polishing.