Choose Any 6, 5.5" CCS Foam Pads from the following colours: Yellow, Orange, White, Green, Black, and Blue.

Or 5.5" Flat Yellow, Orange, White, Black or Blue Pads as well.

Just write down which colours in the comments, at the end of the order if you select this product.

Yellow Low Profile Cutting 5.5 inch CCS Foam Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange or white pad and a fine polish to refine the paint until it is smooth.

Orange Low Profile Light Cutting 5.5 inch CCS Foam Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

White Low Profile Polishing 5.5 inch CCS Foam Pad - Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.

Green Low Profile Polishing/Finishing 5.5 inch CCS Foam Pad - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.

Black Low Profile Finishing 5.5 inch CCS Foam Pad - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Blue Low Profile Finessing 5.5 inch CCS Foam Pad – Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.